Disabling A Forgotten Password - Dell PowerVault 735N Service Manual

Hide thumbs Also See for PowerVault 735N:
Table of Contents

Advertisement

Jumpers, Switches, and Connectors: Dell Powervault 735N Systems Service Manual
Interposer Board Connectors
Figure 3 shows the connectors and sockets located on the interposer board.
Figure 3. Connectors on the Interposer Board

Disabling a Forgotten Password

The system's software security features include a supervisor password and a user password, which are
discussed in detail in "Using the System Setup Program" of the User's Guide. A password jumper on the
system board enables these password features or disables them and clears any password(s) currently in
use.
To disable a forgotten supervisor password or user password, perform the following steps.
NOTICE: See
"Protecting Against Electrostatic
from electrostatic discharge.
file:///C:/Users/Phebega_Pericho/Desktop/spv735N/en/sm/jumpers.htm[3/15/2013 4:18:20 PM]
7 Data cable connector to
the
fifth hard-disk drive
SCSI backplane board
(SCSI ID 4)
1 Control panel cable connector
2 Cooling fans wiring harness connector
(P2)
3 System board interface cable
connector (P1)
4 Interposer board power cable
connector (P3)
5 Diskette drive/CD-ROM drive interface
connector (J1)
Discharge" for information on protecting the system

Advertisement

Table of Contents
loading

Table of Contents