Replacement Methods; Cable - Mitsubishi MELDAS M600 Series Maintenance Manual

4. DAILY MAINTENANCE AND PERIODIC INSPECTION AND MAINTENANCE

4.3 Replacement Methods

4.3.1 Cable

If the cable is replaced without turning the power OFF, the normal unit or peripheral devices could be
damaged, and risks could be imposed.
Disconnect each cable with the following procedures.
a) For the following type of connector, press the tabs with a thumb and forefinger in the direction of
the arrow, and pull the connector off.
② Pull
View from above
② Pull
CAUTION
Do not connect or disconnect the connection cables between each unit while the power is
ON.
Do not connect the cable by pulling on the cable wire.
4.3 Replacement Methods
① Press
① Press
– 29 –
② Pull
② Pull
① Press
① Press