DaytonAudio RS621 User Manual

Specifications: • Impedance: 8 ohms • Frequency response: 60 - 20,000 Hz • SPL: 88 dB 2.83V/1m
• Power Handling: 65 watts RMS • Cabinet dimensions (straight-sided): 12" H x 7.5" W x 10" D
• Cabinet dimensions (curved sided): 12" H x (7.5" front, 4.5" back) W x 10.5" D.

Warranty Information

Dayton Audio ® products are constructed by industry experts, and are thoroughly tested before
shipment. Dayton Audio products are warranted for the period of one year. This warranty
®
is limited to manufacturer defects, either in materials or workmanship. Dayton Audio
responsible for any consequential or inconsequential damage to any other unit or component
or the cost for installation or extraction of any component of the audio system. In the rare
case of a product failure, please contact your place of purchase or call our Customer Support
Department at (937) 743-8248.

Warranty Limitations

There are no other warranties, either express or implied, which extend the foregoing, and
there are no warranties of merchantability or fitness for any particular purpose. The warranty
will not cover incidental or consequential damage due to defective or improper use of prod-
ucts. This includes but is not limited to burnt voice coils, overheating, bent frames, holes in the
cone, or broken lead wires.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state.
Non-Warranty Service: If non-warranty service is required, the product may be sent to the
Company for repair/replacement, transportation prepaid, by calling (937) 743-8248 for details,
complete instructions, and service fee charges.
P.O. Box 52 • Springboro, OH • 45066-052 • Phone: (937) 743-8248
© Dayton Audio
®
Frequency Graph
Dayton Audio RS621
® is not
UMRS62109A
Speaker System
User Manual
www.daytonaudio.com