Advertisement
Warranty Information
Dayton Audio products are warranted free from defects in material and workmanship for 5 years from
date of purchase (see exceptions below). In the rare case of a product failure, please contact your place of
purchase or call our Customer Support Department at (937) 743-8248.
Warranty Limitations
There are no other warranties, either express or implied, that extend the foregoing, and there are no
warranties of merchantability or fi tness for any particular purpose. Dayton Audio is not responsible for any
consequential on inconsequential damage to any other unit or component or the cost for installation or
extraction of any component of the audio system, or for the improper use of products. This includes but is
not limited to burnt voice coils, overheating, bent frames, holes in the cone, or broken lead wires. Warranty
does not apply to misuse, abuse, neglect, accident, improper use, etc. Dayton Audio reserves the right to
repair or replace the products with either a new or factory refurbished unit.
Exception: Dayton Audio HDMI Cables -- No registration, no questions asked LIFETIME warranty.
Replacement of Dayton Audio HDMI cables is with equal or better quality HDMI cables. Unassembled Kits -
A 45-day return policy applies to unassembled kits. Once assembly has been started or completed, kits are
deemed used and are nonreturnable for refund/exchange. This does not limit the manufacturers' warranty
policies on any kit component.
This warranty gives you specifi c legal rights and you may also have other rights that vary from state to state.
Non-Warranty Service: If non-warranty service is required, the product may be sent to the Company for
repair/replacement, transportation prepaid, by calling (937) 743-8248 for details, complete instructions, and
service fee charges.
daytonaudio.com
tel + 937.743.8248
info@daytonaudio.com
Dayton Audio
®
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
Last Revised: 11/18/2015
BLUETOOTH
SPEAKER
Model: MARK1 User Manual
Advertisement
Table of Contents
Related Manuals for DaytonAudio MARK1
Summary of Contents for DaytonAudio MARK1
- Page 1 There are no other warranties, either express or implied, that extend the foregoing, and there are no warranties of merchantability or fi tness for any particular purpose. Dayton Audio is not responsible for any Model: MARK1 User Manual consequential on inconsequential damage to any other unit or component or the cost for installation or extraction of any component of the audio system, or for the improper use of products.
- Page 2 • Do not place liquid on or close to unit. • Do not place unit on or near an open flame or heat source. • Keep product free from dust and debris. • Place unit on a stable and level platform. • Do not place heavy items on top of unit. • Do not use excessive force when pushing the unit buttons. • Do not attempt to pull the power cord when removing it from power outlet. • Product uses Lithium Batteries, please don't burn, ingest, or smash batteries. • Do not use damaged or defective power cables. • Unplug the power cable if the unit is not in use. • Clean with a damp cloth only. PACKAGE CONTENTS 1. MARK1 speaker 2. Power adapter 3. 3.5 mm audio cable 4. User manual CONTROL PANELS 1. Power/Input LED 9. Pair Button 2. NFC Icon 10. Phone Button 3. Back Button 11. Volume - Button 4. Play/Pause Button 12. Charging Indicator...
- Page 3 TROUBLESHOOTING/NOTES • If the Speaker can’t be found in Bluetooth mode the speaker could be connected to another device. Remove the device from any other devices and CONTROL PANELS try again. If you still can’t find the Bluetooth speaker, please turn off the speaker for 5 second then turn it back on. FRONT PANEL • Bluetooth signal is intermittent: the effective distance between speaker and device is 30 feet, the signal will be intermittent if the distance between the device and speaker is more than 30 feet. • If your Bluetooth device is in search mode it may find many other Bluetooth devices, please wait until the search is finished and select the MARK1 speaker to pair. • Don't hold the mobile device to close to the speaker when using the phone function to avoid echo. • NFC: please make sure the mobile has NFC function and it is turned on in the device. SPECIFICATIONS TOP PANEL Operating temperature: 0ºC-55ºC (32ºF~131ºF) Amplifier output power: Left/Right 1.5Wx2, subwoofer 3.5Wx1 Amplifier input sensitivity: ≤400m V Amplifier SNR: ≥ 70dB...
- Page 4 8. Control Panel ON/OFF: VOL + / VOL - Press and hold the VOL+ and VOL- at same time for 3 seconds, the 2. Power-on: LED Indicator will turn purple and Switch the Mark1 on, the voice prompt the control buttons are now inactive will announce “Power ON”. The front LED except the PHONE button. Repeat these steps to activate the control panel buttons. will be illuminated blue and the speaker is ready for use in Bluetooth mode. 9. USB Charging Port: The MARK1 has a standard 3.
Need help?
Do you have a question about the MARK1 and is the answer not in the manual?
Questions and answers