Crws Configuration Instructions - Cisco SOHO 97 Setup Manual

Chapter 1 Cisco 837 Router and Cisco SOHO 97 Router Cabling and Setup

CRWS Configuration Instructions

If you did not receive the Cisco Router and Security Device Manager (SDM) Quick Start Guide,
Cisco Router Web Setup (CRWS) is loaded on your router. These instructions show you how to
configure your router using CRWS. The CRWS software runs on Netscape versions 3.0 through 4.7, and
on Internet Explorer version 4.0 or later.
The Cisco Router Web Setup (CRWS) software is loaded on the router and should be used to configure
the router to connect to the Internet. The CRWS software runs on Netscape version 3.0 through 4.7, and
on Internet Explorer version 4.0 or later. Follow these steps to start the CRWS software and configure
the router:
Start, or restart, a PC connected to one of the router Ethernet ports (1, 2, 3, or 4).
Step 1
Open a web browser. Make sure that the browser is set to work in online mode.
Step 2
•
•
Type in the universal resource locator (URL) shown in
Step 3
Figure 1-3
The CRWS dashboard
78-14782-07
In Internet Explorer, click the File menu, and verify that the "work offline" option is unchecked.
In Netscape, the default selection in the File menu is set to work online.
Type in the URL http://10.10.10.1
(Figure
Cisco 837 Router and Cisco SOHO 97 Router Cabling and Setup Quick Start Guide
Figure
1-4) should appear after one or two minutes.
Configure the Router
1-3.
1-5