Fm Radio Function - Party Light & Sound PARTY-6LED Instruction Manual

Description of the controls
1. Master volume control
2. Microphone volume control
3. Tone control
4. Microphone input
5. Switches the LED on the woofer on /off
6. When the power adaptor is connected, the indicator lamp lights up in red as long as the battery will be
charging. It lights up in green, when the battery is fully charged.
7. FM antenna: Extend to its full length for optimal reception
8. AUX input via 3.5mm mini stereo jack
9. Input selector: Press this button to switch between the various inputs (AUX, USB, SD, Bluetooth, FM)
10. In USB/SD/Bluetooth mode: press to go back to the previous track. In FM mode: press to go to the
previously stored FM station.
11. Play/pause in USB/SD/Bluetooth mode. In FM mode, press and hold this button to start searching for
radio stations and store them automatically in the memory
12. In USB/SD/Bluetooth mode: press to go to the next track. In FM mode: press to go to the next stored
FM station.
13. USB stick input
14. SD card input
15. 5Vdc input to charge the built-in battery via the supplied USB lead
16. ON/OFF switch of the system
CONNECTION OF A WIRED MICROPHONE
Connect the microphone to the MIC IN socket and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound
output.
KARAOKE Function
This feature is available with any input. Play a track through AUX/USB/SD/FM/Bluetooth, connect a
microphone and sing along.
USB/SD Operation
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could
generate interference. If the speaker stops working, switch it off and on again, or unplug USB/SD/MMC
card and re-plug it. The speaker should be back to normal status.
The maximum size of USB/SD device that can be connected is 32 GB.
Supported music formats: MP3, WMA

FM RADIO FUNCTION

1. Turn on the unit and press repeatedly the input selector key and select FM function (the display will
show the frequency).
2. Press the PLAY/PAUSE button on the unit to activate the auto memory (the radio starts an automatic
search for available radio stations and saves them automatically). The number of stations stored depends
on the radio signal in your area.
During the search, press PLAY button to stop searching.
3. Use the  and  keys to listen to the various radio stations saved in memory.
©Copyright LOTRONIC 2017 PARTY-6LED 4