Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Diamond N600
Summary of Contents for Diamond N600
- Page 1 11/2010 Mod: N600 Production code: UF600...
- Page 2 Model: UR200-UR400-UR600 UF200-UF400-UF600 Users manual...
- Page 3 Important safety instructions 1. To obtain full use of the cabinet, we recommend reading this instruction manual. 2. It is the user’s responsibility to operate the appliance in accordance with the instructions given. 3. Contact your dealer immediately in case of any malfunctions. 4.
- Page 4 Electrical connecting The cabinet operates on 230 V/50 Hz. The wall socket should be easily accessible. All earthing requirements stipulated by the local electricity authorities must be observed. The cabinet plug and wall socket should then give correct earthing. If in doubt, contact your local supplier or authorized electrician.
- Page 5 Thermostat The thermostat is placed in the control panel, see fig. 2.0. Fig. 2.0 The thermostat has been pre-set and in most cases it is not necessary to adjust the settings. When turning on the cabinet the display will show the current temperature in the cabinet. Display set temperature: Press this key and the display will show the set temperature.
- Page 6 Defrosting UR-models defrosts automatically when the compressor stops. UF-models must be defrosted manually. We recommend defrosting the freezer every three month or if the layer of ice exceeds 5 mm. Do never use metal or other sharp objects to scrape the internal sides as it can damage the freezer 1.
- Page 7 Service The cooling system is a hermetically sealed system and does not require supervision, only cleaning. If the cabinet fails to cool, check if the reason is a power cut. If you cannot locate the reason to the failure of the cabinet, please contact your supplier. Please inform model and serial number of the cabinet.
Need help?
Do you have a question about the N600 and is the answer not in the manual?
Questions and answers