Dimension Ø61mm(2.4") 16mm(0.6") 29.6mm(1.2") 400mm(15.7") Control Locations 1. Volume up: To adjust volume up 2. Mute: To silence the audio 3. Tune/Track up: To move radio frequency up in tuner mode or track in USB, iPod, BT Music mode etc. that the receiver supports 4.
Page 3
Wiring BLACK BOX(not included) Extension Cable(included 7.5M) HEAD UNIT(not included) 3.5mm jack connects directly into Wired Remote input (Steering Wheel Control) input of any receiver Once the remote has been mounted, connect the extension cable to the remote and head unit as shown in the diagram above. When routing the extension cable. be sure to avoid sharp objects, tight corners, and places where it might get pinched as this could affect performance and cause damage to the unit.
Turn on the receiver and test the functions of the remote control. * Choose and prepare location. MWR17 is designed to be mounted in a 2"(50mm) gauge cutout. Mounting depth will vary, but at least 2.5" is needed to mount the remote control.
Page 5
Standard Gauge Cutout Mounting Attach rubber gasket to the back of remote housing and insert into gauge hole opening. Fasten to the stainless mounting bracket with the included hardware.