Philips Sonicare DiamondClean 9000 Manual page 12

12 English
2 Place the toothbrush bristles against the teeth at a slight angle (45
degrees), apply light pressure to make the bristles reach the gumline or
slightly beneath the gumline.
Note: Keep the center of the brush head in contact with the teeth at all
times.
3 Press the power on/off button to turn on the Philips Sonicare.
4 Apply light pressure to maximize Philips Sonicare's effectiveness and let the
Philips Sonicare toothbrush do the brushing for you. Gently move the brush
head slowly across the teeth in a small back and forth motion so the longer
bristles reach between your teeth. Continue this motion throughout the
brushing cycle.
Note: Different modes are available (see 'Brushing modes').
5 To clean the inside surfaces of the front teeth, tilt the brush handle semi-
upright and make several vertical overlapping brushing strokes on each
tooth.
45°