Hawking HNC800PTZ Quick Installation Manual page 13

5
After completing the search, the main IP Setup window will ap
as you have a DHCP server on your network (most networks
program should have returned an IP address for your network
"IP Address" heading, that is consistent with your existing LAN settin
( Note: A DHCP server provides IP addresses to client devices on the same
n etwork.)
Check the box next to the "Series Num
d esired camera.
(Note: If the IP Setup window does no
" Search" button at the bottom of the win
c ameras on your network. If clicking the "
c ameras in the white camera list area, you
t o insert into the reset hole on the left side
t he base of the camera. Hold the "Reset
L EDs will flash continuously and stop twic
a fter the second stop, release the button.)
If the IP Address returned by the IP Setup wizard is not consistent with your
L AN settings, there is no DHCP server on your network, or you want to
assign/change the IP address manually, you can refer to either: a. the IP Setup
wizard's manual, or b. the HNC800PTZ user's manual.
(Note: If you do not know how to determine the IP Addressing scheme for your
network, a detailed example is provided in the "Appendix" section of this QIG.)
ber" (same as MAC Address) of the
t display any devices, click on the
dow. This will search for all similar
Search" button does not return any
will need to find a tool small enough
[if facing the front of the camera] of
" button for two full cycles. The two
e. When the red LED begins to flash
pear. As long
do), the IP Setup
camera, under the
gs.
13