Download
Share
Print this page
  1. Manuals
  2. Brands
  3. DURAVANT Manuals
  4. Stretch Wrapping Systems
  5. Hamer Fischbein 2090
  6. Maintenance instruction

DURAVANT Hamer Fischbein 2090 Maintenance Instruction

Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
MAINTENANCE INSTRUCTIONS AND SCHEDULES
LUBRICATION CHART:
o 1 DAILY
o 2 WEEKLY
o 3 YEARLY
Bearings (2)
Bearing (2)
Tension / Track Belt (2)
Bearing (2)
300VF Page 1 of 2
Gears (3)
Clean Level
Sensor Eyes (1)
Bearing (2)
Bearing (2)
Gears (3)
Bearing (2)
Gearbox Fluid (3)
Fluid Level (2)
Bearing (2)
Bearing (2)
Gearbox Fluid (3)
Fluid Level (2)
27
Rev. 12

Advertisement

loading
Need help?

Need help?

Do you have a question about the Hamer Fischbein 2090 and is the answer not in the manual?

Questions and answers

Related Manuals for DURAVANT Hamer Fischbein 2090

Summary of Contents for DURAVANT Hamer Fischbein 2090

  • Page 1 MAINTENANCE INSTRUCTIONS AND SCHEDULES LUBRICATION CHART: o 1 DAILY o 2 WEEKLY o 3 YEARLY Clean Level Sensor Eyes (1) Bearings (2) Bearing (2) Bearing (2) Gears (3) Bearing (2) Gearbox Fluid (3) Bearing (2) Fluid Level (2) Tension / Track Belt (2) Bearing (2) Bearing (2) Gears (3)
  • Page 2 DAILY OPERATOR RUNNING CHECKS: These tasks should be performed at the beginning of each shift and checked between roll changes: GENERAL RUNNING INFORMATION • Drain the Filter Water Separator Bowl if any water is present. WARNING: DO NOT ALLOW BOWL TO BECOME FULL, CHECK HOURLY. •...
  • Page 3 2090 MAINTENANCE & OPERATION INSTRUCTIONS AND SCHEDULES DAILY OPERATOR RUNNING CHECKS These tasks should be performed at the beginning of each shift and checked between roll changes: TO START MACHINE  Turn Main Disconnect power “ON”  Verify minimum of 80 psi Air to the machine. ...
  • Page 4 HORIZONTAL HOT AIR SEALER  Check Hot Air Plenums for plastic buildup. Scrape clean, if necessary.  Check Film Feed Belts. Pulleys and Bearings for wear or tear and replace, if necessary.  Check for plastic jammed in Pulleys. Remove, if necessary. ...

  • Page 5: Seasonal Maintenance

    SEASONAL MAINTENANCE: These maintenance tasks should be performed before each packaging season:  Replace Film Feed Belts.  Replace Vertical Heat Seal Teflon and Silicone Rubber Backup.  Replace Perforator Blade and Silicone Backup.  Check all Bearings and replace any that do not operate smoothly. ...