Instrument Panel - Ford Focus Electric 2018 Quick Reference Manual

Instrument Panel

2
1
3
6
4
7
6
5
8
1 CRUISE CONTROL
To Set Your Cruise Control Speed
A. Press and release ON.
B. Drive to the desired speed.
C. Press and release SET+, then take
your foot o the accelerator.
A er you set your speed, you can adjust your
cruise speed by pressing and releasing SET+/–.
To disable, press and release OFF.
2 LEFT VEHICLE INFORMATION DISPLAY
Provides you with specifi c information about
various systems on your vehicle including the
status of your high-voltage battery and the
other unique features of your electric vehicle.
Use the le -hand, 5-way controls on the
steering wheel to choose and confi rm settings
and messages. Refer to the Instrument Cluster
and Information Displays chapters in your
Owner's Manual for more information.
3 TILT/TELESCOPE STEERING COLUMN
Unlock the steering wheel by pulling the lever down.
Adjust the steering wheel to the desired position.
Push the lever up to lock the steering wheel in place.
4 RIGHT VEHICLE INFORMATION DISPLAY
Displays information about entertainment, phone,
navigation* and surplus. Use the right-hand,
5-way controls on your steering wheel to scroll,
highlight and make minor adjustments within a
selected menu. Refer to the SYNC 3 chapter in
your Owner's Manual for more information.
5 MEDIA STEERING WHEEL CONTROLS
Press + to increase or – to decrease volume levels.
Press the le or right arrow to hear the previous
or next saved radio station, CD track or MP3 choice.
Pull to access voice recognition.
Press to answer an incoming phone call.
Press to end a phone call and exit phone mode.
PUSH-BUTTON SWITCH AND
6
READY TO DRIVE
Note: Your intelligent access transmitter must be
inside the vehicle to put the vehicle in "Ready to Drive"
mode. The keyless warning alert sounds when you
open the driver door and your vehicle is in RUN.
Allows you to go into "Ready to Drive" mode by
pressing the START STOP control while fully
pressing down on the brake pedal. A green
"Ready to Drive" indicator light appears in the
instrument cluster a er you start the vehicle. This
lets you know that the vehicle is on and ready to
drive. Press the START STOP control again without
pressing the brake pedal to switch the vehicle o .
7 HAZARD CONTROL
8 CHARGER UNLOCK
To stop DC fast charging, press the charge unlock
button on the center console. You can also press the
charging system stop button or touch the charge
unlock button in the touchscreen Settings menu.
*
IF EQUIPPED
7