Advertisement
Quick Links
WinTV Media Center Kit
Quick Installation Guide
Hauppauge Computer Works, Inc.
Hauppauge Computer Works, Ltd
Included with the WinTV Media Center Kits:
•
WinTV-HVR-1600 PCI board or WinTV-HVR-1800 PCI Express
board with NTSC and ATSC tuners, MPEG-2 hardware audio/video compres-
sor for NTSC TV and one FM radio receiver.
•
Media Center Remote control transmitter and two AA batteries
•
Media Center Remote control receiver/blaster box
•
IR transmitter cable (blaster cable)
•
USB cable
•
WinTV Installation CD-ROM for use with Windows XP and Windows Vista
(all versions)
•
WinTV for Media Center QI Guide (this guide) for use with Vista Home
Premium and Ultimate, and Windows XP Media Center Edition
•
WinTV-HVR Quick Installation Guide for use with Windows XP and Vista
Home Basic
Installing the WinTV-HVR-1600 / 1800
MCE Kit for use with Media Center
The WinTV-HVR for Media Center boards differ from the non-MCE version in that it
uses the Microsoft Media Center USB Remote control and IR transmitter
instead of the WinTV-HVR's built-in IR receiver transmitter.
The WinTV-HVR MCE-Kit will work with Microsoft's Media Center application in Vista
Home Premium or Ultimate.
If you have Windows Vista Home Basic, you can still use the WinTV-HVR to watch
and record TV, but you will use Hauppauge's WinTV application instead of Microsoft's
Media Center application. See the WinTV-HVR-1600 Quick Installation Guide for
instructions on installing and using the WinTV application. Note: The Media Center
remote control has limited functionality with Hauppauge's WinTV application.
WinTV-HVR-1600 MCE-Kit
WinTV-HVR-1800 MCE-Kit
© Hauppauge Computer Works, Inc. 2005-2007
www.hauppauge.com
techsupport@hauppauge.com
support@hauppauge.co.uk
QI-WinTV-HVR-MCEKIT-V4.1a-ENG
1
October 13, 2007
Advertisement
Related Manuals for Hauppauge WinTV-HVR-1600 Kit
Summary of Contents for Hauppauge WinTV-HVR-1600 Kit
- Page 1 Home Premium or Ultimate. If you have Windows Vista Home Basic, you can still use the WinTV-HVR to watch and record TV, but you will use Hauppauge’s WinTV application instead of Microsoft’s Media Center application. See the WinTV-HVR-1600 Quick Installation Guide for instructions on installing and using the WinTV application.
-
Page 2: Installation Overview
Step 1: Install the WinTV-HVR board in your Media Center PC and connect the cables Turn the power off on your PC. Install the WinTV-HVR-1600 into a PCI slot. Install the WinTV-HVR- 1800 into a PCI Express x1 slot. On some PC’s, the WinTV needs to be... - Page 3 IR Blaster to change channels on a cable TV or satellite set top box. To install the Media Center remote control receiver/blaster, simply plug one end of The WinTV-HVR-1600 board Media Center remote...
-
Page 4: Troubleshooting
the supplied USB cable into the Media Center remote control receiv- er/blaster box and the other end into any USB port on your Vista Home Premium, Ultimate or Windows XP Media Center PC. Media Center will automatical- ly load the drivers for the MCE remote control. This will take one or two minutes. To test the receiver, click the Start button in the middle of the remote control.