Background Information - Dahua NVR41 Series User Manual

w
The connection parameters except Max Connection cannot take effects until the Device
has been restarted.
Parameter
Max Connection
TCP Port
UDP Port
HTTP Port
RTSP Port
POS Port
HTTPS Enable
HTTPS Port
Step 3 Click
Apply
4.11.3 External Wi-Fi
The device can be connected via wireless network with an external Wi-Fi module, and it can reduce
the difficulty of device connection without a network cable.
Prerequisites
Make sure that external Wi-Fi module is installed on the device.

Background Information

w
This function is supported on select models.
Procedure
Step 1 Select
Table4-56
Description
The allowable maximum clients accessing the Device at the same time,
such as WEB, Platform, and Mobile Phone.
Select a value between 1 and 128. The default value setting is 128.
The default value setting is 37777. You can enter the value according to
your actual situation.
The default value setting is 37778. You can enter the value according to
your actual situation.
The default value setting is 80. You can enter the value according to your
actual situation.
If you enter other value, for example, 70, and then you should enter 70
after the I P address when logging in the Device by browser.
The default value setting is 554. You can enter the value according to your
actual situation.
Data transmission. The value range is from 1 through 65535. The default
value is 38800.
Enable
HTTPS.
HTTPS communication port. The default value setting is 443. You can
enter the value according to your actual situation.
to complete the settings.
>
Main Menu NETWORK
>
Wi-Fi.
297
User's Manual