Specifications; Service Information - Stanley SXPW2823 Instruction Manual

Premium pressure washer
Table of Contents

Advertisement

Available languages

Available languages

NOTICE: Risk of property damage. Use only SIMPSON
Guard or equivalent. Other products could be corrosive and/or contain alcohol which
may cause pump damage.
1.
Turn off pressure washer and disconnect hoses from pump.
2.
Unscrew bottle valve from Pump Guard bottle and remove seal.
3.
Screw bottle valve back onto bottle.
4.
Attach bottle to water inlet of pump.
5.
Squeeze bottle to inject contents into pump.
6.
With ignition switch off, simultaneously pull starter rope and squeeze bottle. Repeat
until protector fluid exits pump outlet. NOTE: This step may require two people.
PRESSURE WASHER
1.
Drain all water from high pressure hose and wrap it onto hose wrap.
2.
Drain all water from the spray gun and wand by holding spray gun in a vertical
position with nozzle end pointing down and squeezing trigger. Store in gun holder.
3.
Wrap up and secure detergent siphon hose so it is protected from damage.
DANGER: Risk of fluid injection. When using replacement spray
wands or guns with this pressure washer, DO NOT use a spray wand
and/or spray gun/wand combination that is shorter in length than
what was provided with this pressure washer as measured from the
nozzle end of the wand to the gun trigger.
NOTICE: The use of any other accessory not recommended for use with this tool could
be hazardous. Use only accessories rated equal to or greater than the rating of the
pressure washer.
MODEL
PSI Max*
GPM Max*
High Pressure Hose
Presure of Inlet Water
Inlet Water
Soap Consumption Rate
* Rated Pressure and Rated Water Flow is within manufacturing tolerance of
(+/- 10%).
In a continued commitment to improve quality, the manufacturer reserves the right to
make component changes, design changes, or specification changes when necessary
and without notice.
Do not return this product to your retailer. Please contact our customer service
department at 1-877-362-4271
ACCESSORIES

SPECIFICATIONS

SXPW2823
2800 psi
2.3 gpm
25 ft. (7.6 m)
20–100 psi
cold tap
10% max

SERVICE INFORMATION

20- ENG
/ POWERWASHER
®
®
SXPW3124
3100 psi
2.4 gpm
25 ft. (7.6 m)
20–100 psi
cold tap
10% max
Pump

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sxpw3124

Table of Contents