First Use - Kamoer KH Carer Quick Start Manual

4. After entering the home Wi-Fi interface, enter the Wi-Fi password, click next, and
wait for the connection to succeed；
5. After the connection is successful, app will prompt that the connection is
successful，The screen shows this Icon.
Bind device
There are two ways to bind devices.
Method 1: Bind the device through the network configuration method described above.
Method 2: If the device has been connected to the cloud through a router, the mobile
phone can be connected to the wireless router, the App will scan and display the locally
available device, and the user directly clicks the "bind" button on the right side of the
device to complete the binding.
Unbind device
Long press the corresponding device icon on the device list page, the "Remove"
icon will pop up at the bottom, click the "Remove" icon to unbind.

First use

After the installation of KH Carer, it is the first time to confirm whether each operation
function of the equipment is normal.
1. Take 50ml seawater sample
Operate the seawater sample pump in app to realize the normal filling of seawater into
the beaker. If seawater is not added to the beaker, check whether the seawater inlet is
put into the sea tank and whether the seawater outlet is in a suitable position above the
beaker.
2. Add test reagent
Manually add the test reagent on the app, you can see that the reagent is added to the
beaker drop by drop, and you can see that the number of drops added is changing on
the device display screen.
If you do not see drops falling into the beaker, check whether the pipeline connection is
6