Table Of Contents; Important Owner Information; Introduction - Hatco POWERMITE PMG-100 Installation, Operating, Service And Parts Manual

CONTENTS
Important Safety Instructions ............Front Cover
Important Owner Information...............................i
Introduction ...........................................................i
Model Description ................................................1
All Models........................................................1
System Overview .................................................1
Specifications .......................................................2
Dimensions......................................................3
Booster Heater Sizing Chart ...........................4
Installation ............................................................7
General............................................................7

IMPORTANT OWNER INFORMATION

Record the model
(identification plate located on the lower right hand
side, front corner of the unit), voltage and purchase
date of your Powermite
spaces below. Please have this information
available when calling Hatco for service assistance.
Model No. ________________________________
Serial No. ________________________________
Voltage __________________________________
Date of Purchase __________________________

INTRODUCTION

Hatco Powermite Gas Booster Heaters are
instantaneous fin tube type heaters designed to
boost the temperature of regularly available hot
water, usually 110°F to 150°F (43°C to 66°C) up to
180°F (82°C). Water at 180°F (82°C) can be used
as sanitizing rinse water in commercial dishwashers
in accordance with Health Codes and National
Sanitation Foundation Standard #5.
The Hatco Gas Booster Heater is design certified
by CSA International and tested under the
requirements of the American National Standard,
ANS Z21.10.3*CSA 4.3-2001, Current Edition.
All Hatco Gas Booster Heaters are factory
pre-plumbed and pre-wired to allow for easy
installation. The control compartment area is
accessible from the front, which permits easy
installation, even when near other equipment.
Hatco Gas Booster Heaters are quality built for long
life and rugged dependability. Dependability of the
booster heater is preserved through proper, safe
installation and operation.
Form No. PMG-100/200M-0805
number, serial number
® Gas Booster Heater in the
Plumbing........................................................11
Gas................................................................15
Electrical........................................................18
Venting ..........................................................19
Operation ............................................................22
Start-Up Procedures......................................22
Maintenance .......................................................24
Wiring Diagram...................................................29
Replacement Parts List .....................................30
Hatco Limited Warranty.....................................32
Authorized Parts Distributors ............Back Cover
Business 8:00 a.m. to 5:00 p.m.
Hours: Central Standard Time
(Summer Hours: June to September -
8:00 a.m. to 5:00 p.m. C.D.T.
Monday through Thursday
8:00 a.m. to 2:30 p.m. C.D.T. Friday)
Telephone: (800) 558-0607; (414) 671-6350
Fax: (800) 690-2966 (Parts & Service)
(414) 671-3976 (International)
24-Hour 7-Day Parts & Service
Assistance available in the
United States and Canada
by calling (800) 558-0607.
Additional information can be found by visiting our
web site at www.hatcocorp.com.
i