Advertisement
Quick Links
ACRYLICARRIER
L A R G E
Phoenix
ASSEMBLY
INSTRUCTIONS
Getting started!
Read these notes first:
1.
Review these instructions thoroughly before attempting to
assemble the carrier. If you still require
Acrylic Habitats Customer Service.
a. Phone:
(984) 777-4811
b. Email:
cu sto merservi ce@acrylic h ab itats. com
c. Online:
www.acrylich ab itats. com
2.
Review All Parts:
If parts have been damaged or are missing,
please contact Acrylic Habitats Customer Service.
3.
Tools:
Phillips Screw Driver (not included). If using power tools,
please be careful not to overtighten any screws.
4.
Two-person assembly is recommended for best results.
5.
Protective Paper:
Please note the orientation stickers on the
protective paper. Test fit all pieces before removing the paper. If any
of the protective paper sticks to the acrylic, we recommend using
Goo Gone or an ammonia free glass cleaner to remove excess glue.
6.
Return Policy:
Returns are ONLY accepted in the original
packaging with the protective paper still intact.
7.
Visit
www. acrylich ab itats. com
assembly videos!
8.
Please do not leave the carrier outside in direct sunlight. Acrylic
is an insulative material and may overheat.
assistance
, please contact
for tutorials and
Advertisement
Related Manuals for Phoenix ACRYLICARRIER LARGE
Summary of Contents for Phoenix ACRYLICARRIER LARGE
- Page 1 Returns are ONLY accepted in the original packaging with the protective paper still intact. Visit www. acrylich ab itats. com for tutorials and assembly videos! Please do not leave the carrier outside in direct sunlight. Acrylic Phoenix is an insulative material and may overheat. ASSEMBLY INSTRUCTIONS...
-
Page 2: Parts List
Parts List Door Knobs with screws (1) Acrylic Habitats Bottom Door Jam with screws (2) Side (2) Hex Nut Driver Stainless Steel Corner Clips (12) Screws (24) Nuts (24) Feeder Cups (2) Phoenix Front Back • Perches (3) 14”... - Page 3 Step 1 Step 2 To assemble the back piece: To assemble the top, bottom, and side pieces: Lay the back of the carrier flat on a hard surface. Position the back piece so the While not necessary, it may be helpful to have a second person assist in holding bottom is closest to you.
- Page 4 Step 3 Step 4 Secure the carrier: To assemble the front piece: Add the second set of screws and nuts to the bottom six corner clips. This will Open the door, place the front piece onto the carrier and gently press the pegs into secure the sides of the carrier to the back of the carrier (Fig 3-1).
-
Page 5: Cleaning & Care Instructions
Gentle screw in the two feeder cups to the inside of the door. THE CARRIER IS NOW FULLY ASSEMBLED AND READY FOR USE. Phoenix CLEANING & CARE INSTRUCTIONS 1. When cleaning the carrier, use an ammonia free glass cleaner or mild dish soap.
Need help?
Do you have a question about the ACRYLICARRIER LARGE and is the answer not in the manual?
Questions and answers