Advertisement
Quick Links
ACRYLICARRIER
S M A L L
Phoenix
ASSEMBLY
INSTRUCTIONS
Getting started!
Read these notes first:
1.
Review these instructions thoroughly before attempting to
assemble the carrier. If you still require
Acrylic Habitats Customer Service.
a. Phone:
(984) 777-4811
b. Email:
cu sto merservi ce@acrylic hab itats. com
c. Online:
www.acrylich ab itats. com
2.
Review All Parts:
If parts have been damaged or are missing,
please contact Acrylic Habitats Customer Service.
3.
Tools:
Phillips Screw Driver (not included). If using power tools,
please be careful not to overtighten any screws.
4.
Two-person assembly is recommended for best results.
5.
Protective Paper:
Please note the orientation stickers on the
protective paper. Test fit all pieces before removing the paper. If any
of the protective paper sticks to the acrylic, we recommend using
Goo Gone or an ammonia free glass cleaner to remove excess glue.
6.
Return Policy:
Returns are ONLY accepted in the original
packaging with the protective paper still intact.
7.
Visit
www. acrylich ab itats. com
assembly videos!
8.
Please do not leave the carrier outside in direct sunlight. Acrylic
is an insulative material and may overheat.
assistance
, please contact
for tutorials and
Advertisement
Related Manuals for Phoenix ACRYLICARRIER SMALL
Summary of Contents for Phoenix ACRYLICARRIER SMALL
- Page 1 Returns are ONLY accepted in the original packaging with the protective paper still intact. Visit www. acrylich ab itats. com for tutorials and assembly videos! Phoenix Please do not leave the carrier outside in direct sunlight. Acrylic is an insulative material and may overheat. ASSEMBLY INSTRUCTIONS...
- Page 2 Parts List Acrylic Habitats Acrylic Habitats Left Side Right Side Bottom Door Knobs with screws (1) Door Jam with screws (1) Stainless Steel Feeder Cups (2) Phoenix Front Back Perches (4) 10.5”...
- Page 3 Step 1 Step 2 To assemble the back piece: To assembly the top, bottom, and side pieces: Lay the back of the carrier flat on a hard surface. Position the back piece so the Attach the top and bottom pieces by gently pressing the pegs into the plugs on bottom is closest to you.
- Page 4 (Fig 3-1) Install the door knob. Tighten the screw from the back of the door (Fig 3-2). Fig 3-2 Phoenix CLEANING & CARE INSTRUCTIONS 1. When cleaning the carrier, use an ammonia free glass cleaner or mild dish soap.
Need help?
Do you have a question about the ACRYLICARRIER SMALL and is the answer not in the manual?
Questions and answers