Download Print this page

V-TAC VT-41150 Installation Instruction

INSTALLATION INSTRUCTION

TRIPOD STAND FOR FLOODLIGHT (VT-41150)

WARRANTY

Model

Power

Max Length

Body Type

IP Ra�ng

Input Power

Unit Color

Dimension

VT-41150 10W - 100W

1.5 meters

Aluminium

IP65

AC:90-240V,50/60Hz Yellow; Black 900x940~1800mm

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC Tripod Stand. V-TAC will serve you the

best. Please read these instructions carefully before starting the installing and

keep this manual handy for future reference. If you have any another query,

please contact our dealer or local vendor from whom you have purchased the

product. They are trained and ready to serve you at the best.The warranty is valid

for 2 years from the date of purchase. The warranty does not apply to damage

caused by incorrect installation or abnormal wear and tear. The company gives no

warranty against damage to any surface due to incorrect removal and installation

of the product. This product is warranted for manufacturing defects only.

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:

SUPPORT@V-TAC.EU

FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST

DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

Table of Contents

Need help?

Do you have a question about the VT-41150 and is the answer not in the manual?

Page 1 AC:90-240V,50/60Hz Yellow; Black 900x940~1800mm INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC Tripod Stand. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product.
Page 2 INSTALLATION DIAGRAM FIG 1 FIG 2 FIG 3 FIG 4 1) Adjust the lower part of the Tripod stand as shown in Fig 1. (Make sure the lower part of the stand is in locked position before you proceed to further steps) 2) Install the floodlight (fixture) on the mounting bar as shown in Fig 2.