Download Print this page
ABC Design Kiddie Ride On Instructions Manual

ABC Design Kiddie Ride On Instructions Manual

Hide thumbs Also See for Kiddie Ride On:

Advertisement

Quick Links

Kiddie Ride On
Kiddie Ride On
Kiddie Ride On
Kiddie Ride On

Advertisement

loading
Need help?

Need help?

Do you have a question about the Kiddie Ride On and is the answer not in the manual?

Questions and answers

Summary of Contents for ABC Design Kiddie Ride On

  • Page 1 Kiddie Ride On Kiddie Ride On Kiddie Ride On Kiddie Ride On...
  • Page 2 If you do not care about the instruction your child could not be fully protected. If you drive through stairs or if you lift up your stroller please take away your child down from the Kiddie Ride On. Please make sure, that all locks are closed This Kiddie Ride On can only be used for one child.
  • Page 3 Fixation on the stroller Fixation on the stroller Fixation on the stroller Please remove the fixation from the Kiddie Ride On as shown on the picture. Push the lever to the backside and open the lock. Now you can easily remove the fixation.
  • Page 4 Pull the plastic slope together with the screw to the outside. Here you can see all parts of the fixation. Pag e 4...
  • Page 5 Take the plastic slope as shown on the picture. Fix it at the backside tube of the stroller. Now take the second part of the fixation to the plastic slope. Pull the plastic slopes to the slot and tighten the plastic slope Pag e 5...
  • Page 6 Put the hull on the screw. Now fix the screw and turn it to the right. Pag e 6...
  • Page 7 Fixation on the stroller Fixation on the stroller The fixation lever of the Kiddie Ride On can be adjusted in the width. Remove the screw (1) (turn to the left)on the lower part of the Kiddie Ride On. Now you can adjust the fixation lever in the width.
  • Page 8 Please press the pin on both sides into the holes of the fixation. Please make sure, that the lock is closed in the right way. Pag e 8...
  • Page 9 Kiddie Ride On Kiddie Ride On Kiddie Ride On For adjusting the Kiddie Ride On in the length please press the button on both sides (1) Now you can adjust the Kiddie Ride On in the length (2). Remove the button and the adjustment will lock.
  • Page 10 For adjusting the Kiddie Ride On in the height please press the buttons on both sides (1). Now you can adjust the levers in the height. Please adjust the height, that the wheels are situated on the floor. If you don´t use the board, you can easily clapp it upwards.
  • Page 11 Now you can remove the lever from the fixation. Take away the Kiddie Ride On from the stroller. You can leave the Kiddie Ride On fixation fixed at the stroller every time. Pag e 11...