Amada AMPS01 Instruction Manual

Specification
01

IMPORTANT SAFETY INFORMATION

• Check package contents against supplied parts and hardware list to assure
that all components were received undamaged. Do not use damaged or
defective parts. lf you require replacement parts, please contact amada
customer service at support@amadahome.com.
• Carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact
customer service at support@amadahome.com.
• Not all parts and hardware included will be used.
• Do not use this product for any purpose that is not explicitly specified in
this manual. We cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use. Thank you for your understanding.

Supplied Parts and Hardware

Tray
B (x1)
M4x10 mm
Foldable Tripod Stand
Bolt
A (x1)
D (x4)
02
Step 1 Adjust the Height of the Tripod
1-1
1-2
Connector
C (x1)
Phillips
Screwdriver
(Not Included)
Slightly loosen the knob.
Warning:
When you unfold or
fold the tripod, please be careful and
avoid pinch areas such as the upper
section of the supporting leg. DO
NOT place hands on or near the
joints of the supporting leg.
When you adjust the pillar to your desired height,
tighten the knob, then insert the safety pin into the
hole on the pillar.
03