Advertisement
Available languages
Available languages
Operation
Pairing a Bluetooth
1. Turn on your Bluetooth
2. Power on Adventurer
™
Adventurer
will reconnect. Press and release the Bluetooth
paired Bluetooth
3. Press and release the Bluetooth
4. Navigate to your Bluetooth
Note: If your Bluetooth
5. To disconnect the paired Bluetooth
6. To connect to another Bluetooth
Tip: If you would like to disable (or enable) the voice prompts, double press the Bluetooth
button.
Linking Two Speakers
If you would like to play music from a Bluetooth
together in order to listen to your music in stereo. One Adventurer
speaker and the other will serve as the right speaker. The speakers should be within 50' (15.2
m) of each other to properly link.
To link two Adventurer
1. Press and hold the Link button on both speakers to enter Stereo-Link mode. You will hear
a tone, and the word LINK will flash on each speaker's Display while they search for each
other. Once a link has been established, the word LINK will remain on the Display.
Note: The linking process can take up to a minute to complete. The closer the two
speakers are to each other, the quicker the link is established.
2. Once the two speakers are linked, press and release the Bluetooth
speaker to begin the Bluetooth
pairing will serve as the primary (Left channel) speaker. On its Display screen, the
®
Bluetooth
icon will flash to indicate that Bluetooth
3. Navigate to your Bluetooth
your Bluetooth
speaker's Display, and you will be able to play audio from the Bluetooth
your two linked speakers.
4. To unpair the Bluetooth
speaker. To disconnect two speakers or cancel linking between the two, double press the
Link button on either speaker.
6
®
Device
®
device.
™
. If you have previously connected to another Bluetooth
®
device.
®
®
device's setup screen, find "Adventurer
®
device prompts for a pairing code, enter "0000".
®
™
speakers together:
®
®
device's setup screen, find Adventurer
®
device is connected, the Bluetooth
®
device, press and release the Bluetooth
button again to pair to a Bluetooth
®
device, press the Bluetooth
device, repeat steps 3-4.
®
device, you can first "link" two Adventurer
pairing process. The speaker you use for Bluetooth
®
pairing is in process.
®
button to disconnect the
®
device.
™
" and connect.
®
button.
™
will serve as the left
®
™
and connect. When
®
icon will be lit solid on the primary
®
button on the primary
®
device,
®
™
s
button on either
®
®
device through
Advertisement
