Sony VAIO PCV-J100 Upgrading And Maintaining page 15

8 Place the drive holder against the inside of the front chassis and slide it back.
Be sure to align the slots on the drive holder with the tabs on the inside of the
chassis. Be sure to slide the drive holder back so that the tabs slip into the
notch at the bottom of the slot.
Replacing the drive holder in the PCV-J100
9 Push back the drive holder lever into the original position.
10 Replace the sideplate and reinstall the screws, as described on page 16.
Your computer automatically recognizes the new drive and configures itself
accordingly when you turn it on. Partition and format the new drive following the
instructions provided with the drive.
Installing an Additional Hard Disk Drive
15