Product Markings - Acqiris SA108P Startup Manual

Notices

Product Markings

The CE mark is a registered trademark of the
European Community.
Australian Communication and Media Authority
mark to indicate regulatory compliance as a
registered supplier.
This symbol indicates product compliance with
the Canadian Interference-Causing Equipment
Standard (ICES-001). It also identifies the product
is an Industrial Scientific and Medical Group 1
Class A product (CISPR 11, Clause 4).
This product complies with the WEEE Directive
marketing requirement. The affixed product label
(above) indicates that you must not discard this
electrical/electronic product in domestic
household waste. Product Category: With
reference to the equipment types in the WEEE
directive Annex 1, this product is classified as
"Monitoring and Control instrumentation" product.
To return unwanted products, contact your local
Acqiris office.
This symbol on an instrument means caution, risk
of danger. You should refer to the operating
instructions located in the user documentation in
all cases where the symbol is marked on the
instrument.
Acqiris SA108P Startup Guide
This symbol indicates the time period during
which no hazardous or toxic substance elements
are expected to leak or deteriorate during normal
use. Forty years is the expected useful life of the
product.
This symbol indicates the instrument is sensitive
to electrostatic discharge (ESD). ESD can
damage the highly sensitive components in your
instrument. ESD damage is most likely to occur as
the module is being installed or when cables are
connected or disconnected. Protect the circuits
from ESD damage by wearing a grounding strap
that provides a low resistance path to ground.
Alternatively, ground yourself to discharge any
built-up static charge by touching the outer shell of
any grounded instrument chassis before touching
the port connectors.
This symbol denotes a hot surface. The side
cover of the module will be hot after use and
should be allowed to cool for several minutes.
The FCC certification mark certifies that the
electromagnetic interference from the device is
under limits approved by the Federal
Communications Commission.
6