Assembly - Husky H27LOCKER4 Use And Care Manual

Assembly

1
Locker door orientation
1. To ip the door to the Locker (A), rst secure the door in the "open" position on a small block to help keep the door level.
Remove the door by removing the 11 Phillips head bolts inside the hinge of the Locker (A). Then re-install the door with the
11 Phillips head bolts along the hinge located on the right side of the Locker (A). Ensure the door is level and centered in the
opening before tightening the 11 bolts.
A
2. Remove the Power outlet (C) from the left wall of the Locker (A) by removing the 6 Phillips head screws from the outlet panel
cover (D) and gently pulling the Power outlet (C) and holder from the cabinet.
A
D
C
Two people are recommended for assembly.
CAUTION:
A
Opening
direction
6
Opening
direction