Technical Data; Product Drawing - Ebmpapst K3G500-PB38-19 Operating Instructions Manual

K3G500-PB38-19

3. TECHNICAL DATA

3.1 Product drawing

All dimensions in mm.
1 Installed position: shaft horizontal (install support struts only vertically as illustrated) or rotor on bottom; rotor on top on request
2 Cable diameter min. 4 mm, max. 10 mm, tightening torque 4 ± 0.6 Nm
3 Cable diameter min. 9 mm, max. 16 mm, tightening torque 6 ± 0.9 Nm
4 Tightening torque 3.5 ± 0.5 Nm
5
Inlet ring with pressure tap (k-factor: 281)
6 Mounting holes for FlowGrid
Item no. 55264-5-9970 · ENU · Change 260717 · Approved 2022-06-23 · Page 4 / 15
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
Operating instructions