Technical Data; Product Drawing - Ebmpapst K3G450-PB24-01 Operating Instructions Manual

K3G450-PB24-01

3. TECHNICAL DATA

3.1 Product drawing

All dimensions in mm.
1 Installed position: shaft horizontal (install support struts only vertically as illustrated) or rotor on bottom; rotor on top on request
2 Cable diameter min. 4 mm, max. 10 mm, tightening torque 4 ± 0.6 Nm
3 Cable diameter min. 9 mm, max. 16 mm, tightening torque 6 ± 0.9 Nm
4 Tightening torque 3.5 ± 0.5 Nm
5
Inlet ring with pressure tap (k-factor: 240)
6 Attachment holes for FlowGrid (35505-2-2957 not included in scope of delivery)
Item no. 54672-5-9970 · ENU · Change 212939 · Approved 2021-02-08 · Page 4 / 15
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
Operating instructions