Table Of Contents; Important Owner Information; Introduction - Hatco GR2A-18 Installation & Operating Manual

Glo-ray® designer infrared foodwarmers gr2a & gr2ah series
Table of Contents

Advertisement

CONTENTS
Important Owner Information.....................................i
Introduction ...................................................................i
Important Safety Instructions .....................................1
Model Descriptions .......................................................2
All Models ..............................................................2
GR2A and GR2AH Models ....................................2
Model Designations ................................................2
Specifications.................................................................3

IMPORTANT OWNER INFORMATION

Record the model number, serial number (identification
plate is located on the inside of the leg near the top),
voltage and purchase date of your Designer Infrared
Foodwarmers in the spaces below. Please have this
information available when calling Hatco for service
assistance.
Model No. ____________________________________
Serial No. ____________________________________
Voltage ______________________________________
Date of Purchase ______________________________

INTRODUCTION

Hatco Glo-Ray
Designer Infrared Foodwarmers ensure
®
maximum holding and minimize the risk of food-borne
illness. Optimum safety and quality is the result of food
held at the proper serving temperatures, using Glo-Ray's
pre-focused heat patterns. The pre-focused heat pattern
prevents foods from being over-cooked in the middle
and cooling off around the edges by concentrating
higher temperatures to the outer edges of holding
surfaces where heat loss is the greatest. Utilizing
specially designed reflectors to direct the heat from the
element, Glo-Ray safely maintains peak serving
temperatures longer, without continuing to cook the
food.
The Glo-Ray Designer Foodwarmers are available with
or without shatter-resistant incandescent lights to
illuminate the warming area. These bulbs have a special
coating that guards against injury and food
contamination in the event of breakage.
Form No. GR2AM-0601
Dimensions............................................................11
Installation...................................................................12
Location ................................................................12
All Models ............................................................13
Assembly...............................................................13
RMB (Remote Control Box).................................14
Electrical Requirements ........................................14
Breath Protector (Optional)...................................14
Operation.....................................................................14
All Models ............................................................14
Maintenance ................................................................15
Cleaning ................................................................15
Display Light Bulb Replacement..........................15
Hatco Limited Warranty............................................16
Authorized Parts Distributors....................Back Cover
Business
8:00 a.m. to 5:00 p.m.
Hours:
Central Standard Time
(Summer Hours: June to September -
8:00 a.m. to 5:00 p.m. C.D.T.
Monday through Thursday
8:00 a.m. to 2:30 p.m. C.D.T. Friday)
Telephone: (800) 558-0607; (414) 671-6350
Fax:
(800) 690-2966 (Parts & Service)
(414) 671-3976 (International)
i

Advertisement

Table of Contents
loading

Table of Contents