Troubleshooting; Specifications - Lenoxx Barista Mate MF500 Manual

TROUBLESHOOTING

Item Issue
1 Indicator light doesn't
work/jug doesn't work
3 Motor doesn't work
4 No heating
5 Charring

SPECIFICATIONS:

Voltage: AC 220-240V 50/60Hz
Power: 500W
Capacity:
MIN: approx.100 ml
MAX: approx. 250ml for frothing, max for heating and hot chocolate 500ml
Reason
Plug is not inserted
properly
No power in the jack
Problem with
components
Jug temperature is too
high
Jug is damaged with
immersion in water
Jug not cleaned in soon
after use, milk locks the
mechanism.
Motor damaged
Machine is damaged
Dosage of milk either too
little or too much
Jug was reused without
cleaning/rinsing
Actual voltage is much
lower than specified
voltage
Solution
Re-insert plug
Check the electric circuit
Repair or replace
Rinse the inside of the jug
with cold water to reduce
temperature
Repair or replace jug
Clean and move the shaft
sleeve of motor by hand to
loosen it.
Repair or replace
Repair or replace
Ensure the milk is over the
min mark, and not past
max mark
Always clean after each
use
Ensure you use the
appropriate voltage