Sound - Sanyo FW43D47F Owner's Manual

Sound

Before you begin:
You must set Location to Home. L p. 30
Otherwise, personalized picture and sound settings will not be memorized
after the unit goes into standby mode.
1
Press MENU and use H I to select Sound, then press OK.
Picture Auto sound
Sound Equalizer
Setup Virtual surround sound
Features Auto volume leveling
Language TV speakers
USB Digital output format
Primary MTS
2
Use H I J K to select the item you want to adjust, then press OK.
To select the desired setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Music
or News)
When you adjust the following settings (Equalizer,
Auto sound
Virtual surround sound or Auto volume leveling),
Personal sound will be set automatically when
Location is set to Home.
Adjust the tonal quality for each frequency.
Cursor I
Equalizer
To adjust each level of tonal quality.
Press BACK to go back to the previous menu.
Virtual surround sound gives you the stereophonic virtual space through your
existing 2-channel stereo system.
Off
Virtual surround
sound
On
This function keeps a constant loudness level between the TV commercials
and the programs.
Off
Auto volume
leveling
On
You can select the audio output from the unit's speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI cable
to this unit, some sound operations such as volume up can be changed by
using this unit's remote control.
On
Off
TV speakers
fun-Link
Standard
On
Off
On
Bitstream
Stereo
Cursor H
Natural effect
Emphasized effect
To remove the Auto volume
leveling
To reduce volume differences
between the TV commercials and
the programs
To output sound from the unit's
speakers
No output sound from the unit's
speakers
To control audio output from your
connected fun-Link (HDMI CEC)
compliant devices with VOL + / – by
using this unit's remote control.
You can select audio output through a digital audio output connector.
Bitstream
Digital output
format
PCM
You can set the output mode as a default for the sound mode (Analog TV
only).
This setting is not interlocked when you change the output mode by pressing
SAP. Refer to Switching audio mode. L p. 17
Stereo
Primary MTS Mono
SAP
Note(s)
When Digital output format is configured for Bitstream output while content with Bitstream audio
●
is being played, Voice guide ( L p. 24) is not contained in the output.
22
To output Bitstream signals
(When the audio of the content is
PCM, it will be output in PCM even
if Bitstream is selected.)
To output PCM format
To output stereo audio
To output mono audio
To output second audio program
Continued on next page.
.
English