Bosch WDU28561GB Instruction Manual And Installation Instructions page 43

End signal
You can select position 1 and use the
˜ button to adjust the volume of the
end signal, e.g. '- „.
Possible setting values:
0 off
1 quiet
2 medium
3 loud
4 very loud
Button signal
You can select position 2 and use the
˜ button to adjust the volume of the
button signal, e.g. ›- „.
Possible setting values:
0 off
1 quiet
2 medium
3 loud
4 very loud
Appliance settings
Brightness
Possible setting values: 1 - 4
You can select position 3 and use the
˜ button to adjust the brightness of the
Touch-Display, e.g. '- „.
Possible setting values:
1 not very bright
2 normal level of
brightness
3 bright
4 very bright
Switching the drum-care information
signal on/off
You can select position 4 and use the
˜ button to switch the Drum Clean
information signal on or off, e.g. š- ‚.
Possible setting values:
0 off
1 on
en
43