4. SCALE POWER OPTIONS
4.1 Power Adapter
To power the Stability Pro scale via a wall outlet, plug the included
power adapter into the port on the left side of the front edge of the
scale. Then plug into a wall outlet.
4.2 Battery Power
To operate the Stability Pro scale with batteries, open the battery
compartment and add 6 new AA batteries (not included). Use a
Phillips head screwdriver to remove the battery cover on the back
of the scale. The power adapter may still be used when batteries
are inserted in the scale. When the scale is plugged in, the power
adapter will override the battery power option. When operating on
battery power, the batteries can be expected to power the scale for
a typical service life of 1 year, or for at least 480 uses to measure the
balance and weight of a single patient, whichever comes first.
If at any time your scale will not power on, the batteries may be
dead. Replace dead batteries only with 6 new AA batteries. Only
use batteries that are UL/IEC approved. Do not use rechargeable
batteries - they will not be recharged when the unit is plugged in.
8