ZIBRIO Stability Pro Quick Start Manual

Congratulations on your ownership of a Stability Pro scale! We're delighted to support you in helping others
understand and manage their balance. For instruction manual and help videos, visit
Taking a Balance Test
1) Place scale on a hard, level floor, at least 1.5 feet from a wall with a focal point, like the test instructions
poster, at eye level.
at least 1.5 ft
2) Plug in the scale.
3) Press on the center of the scale to zero it. You should hear a beep and see '- - -' on the display as
confirmation that zeroing has occurred; the display will then read '0.0. ' Zero the scale any time it has
been moved between uses.
4) Stand still on the scale with feet a comfortable width apart and hands at sides. After a few seconds, the
scale will beep and the balance test will begin. The balance test will last 60 seconds.
Keep still throughout the test
and breathe normally.
5) At the end of the test, the scale will beep and the balance score will be displayed (1-10). Note : If you will
use the scale again later, you might need to wake it up by pressing on it.
Balance Score Interpretation
1-3 (red zone) means high risk of falling
4-6 (yellow zone) means moderate risk of falling
7-10 (green zone) means low risk of falling, best balance
QUICK START GUIDE
Keep your eyes open and
look forward. Do not look
down or move your head.
www.zibrio.com/start
Do not talk or chew
gum during the test.