Table of Contents
Advertisement
4
Day-to-Day Operation
56
Canceled Cycles
You can cancel a cycle at any time by touching Cancel Cycle, except during the
final vent phase. The STERRAD 200 Sterilizer may also cancel a cycle if it
detects a problem with the cycle. The load from a canceled cycle can only be
removed from the input side.
To manually cancel a cycle:
1. Touch Cancel Cycle.
2. Cancel Confirmation is displayed.
3. Touch YES to confirm cancellation and cancel the cycle. Touch NO to
return to the Cycle in Progress display.
4. Ten beeps sound and the Cycle Canceled/Operator Cancellation message is
displayed.
Figure 23. Touch Cancel to start a manual cancellation.
The display requests confirmation of the cancellation.
Touch YES to confirm. Touch NO to return to the previous display.
5. A paper printout exits the printer with a message in red ink.
6. The sterilizer automatically completes the cancellation process (which
includes a short plasma stage during most phases of the process).
®
STERRAD
200 User's Guide
Advertisement
Table of Contents
