Table of Contents
Advertisement
Troubleshooting
Problem
Hair dryer will not
turn on.
Hair dryer suddenly
stops working.
Display shows Error
Code "E1".
Display shows Error
Code "E2".
Hair dryer stops
heating, but the fan still
works.
If your problem is not listed, please contact
Make sure the hair dryer is plugged in.
Make sure the RESET button on plug is pressed in. (see page 6)
Overheat protection has been activated. Wait 10–20 minutes to allow the hair
dryer to cool, then turn it back on. The hair dryer should work normally.
The heat sensor has malfunctioned. Real-time temperature cannot be displayed.
You will not be able to use Intelligent Temperature Control (TP), but you can still
use the hair dryer in Normal Mode.
Contact
Customer Support
Overheat protection has activated. Wait 10–20 minutes to allow the hair dryer to
cool, then turn it back on. The hair dryer should work normally.
Overheat protection has activated. Wait 10–20 minutes to allow the hair dryer to
cool, then turn it back on. The heating functions should work normally again.
Customer Support
Possible Solution
(see page 18).
(see page 18).
15
Advertisement
Table of Contents
