Performing Complex Configurations
After you have installed your Cisco 7206 router hardware and minimally configured the system, you might need to perform
more complex configurations, which are beyond the scope of this publication.
For specific information on system and interface configuration, refer to the modular configuration and modular command reference
publications in the Cisco IOS software configuration documentation set that corresponds to the software release installed on your Cisco
hardware. These publications contain additional information on using the configure command.
Replacing or Recovering a Lost Password
See the Cisco 7206 Installation and Configuration Guide , Chapter 4, "Observing System Startup and Performing a Basic
Configuration" for instructions. It is possible to recover the enable or console login password. The enable secret password is
encrypted and must be replaced with a new enable secret password.
23