CADDX NXG-1820-EUR User Manual

NXG-1820-EUR Touch Screen User Manual
Introduction
NXG-1820 is an intuitive graphical touch screen interface for
users of the xGen security system. It is offering simple fingertip
control, via its clear 3.5 in. touch screen with easy to
understand graphic icons.
Speaker
System
Away Arm
(2)
Status
(5)
Main Menu
(6)
Partition List (7)
System Status bar – this colour coded section will provide
1.
detailed information about your system.
Note: System Status Bar is shown only in disarmed state.
Away – touch this button to arm the system in Away Mode.
2.
Stay – touch this button to arm the system in Stay Mode.
3.
Off – touch this button to disarm the system and to
4.
acknowledge fault messages.
Status – touch this button for detailed status on partitions,
5.
zones, and devices.
Menu – touch this button to access the menus.
6.
Partition List – touch this button to view partition details.
7.
SOS – touch this button to access emergency features
8.
and the installer information.
© 2021 Carrier
Navigating the NXG-1820E Touch Screen
Status and information typically appears in the top section of
the screen.
User functions display in the middle of the screen. Navigation
buttons allow you to scroll up and down through the
currently selected item/menu. Left and right arrows
to the previous and next items. Some screens feature a "Go to"
button allowing you to navigate directly to the item.
The bottom tool bar may display a back button
the previous screen, a home button
screen, or an OK button
Status Bar
(1)
Entering a PIN Code
System
Stay Arm
You will need a valid PIN code to access to various features
(3)
and system information.
System After a period of inactivity, a screensaver will appear and it will
go into power save mode. Tap the screen to wake it up. A
Disarm
screen will appear requesting to enter your code. A valid PIN is
(4)
required to unlock the screen and access the system.
Emergency
(8)
Enter a valid user code followed by ENTER
codes can be between 4 and 8 digits in length. The default
master user PIN code is 1234.
If you make a mistake, press the Delete key
If the PIN code is invalid for the feature you are trying to
access you will be returned to the home screen.
Permissions are assigned to users and keypads to determine
what features a user can access and at what times. If you are
unable to access a feature, contact your installation company
or building manager.
1 / 8
move
to return to
to return to the home
to save the current settings.
. User PIN
.
P/N 230444 • REV J • ISS 16MAR21