Warranty - FEUERHAND PYRON User Manual

Step 3:
Now place the bottom on the feet and insert
the ash dish.
Step 4:
After that put the upper part, consisting of
the riveted inner and outer casings, onto the
construction, and tighten the upper screws.
Insert the charcoal grate. The fire barrel is now
ready for use.
INSTRUCTIONS FOR CARE,
CLEANING AND STORAGE
If you want the fire in the fire barrel to extin-
guish, just let it burn down completely without
adding more fuel. Do not pour water into the
fire barrel for extinguishing the fire. Make sure
to always having a bucket of sand or a powder
fire extinguisher nearby in case of emergency.
Please note that improper maintenance and
storage may lead to rust, even on stainless
steel. Amongst others, this includes ash resi-
dues that have not been removed from the fire
barrel. As ash is hygroscopic, it binds water
from the air humidity and forms an alkaline
solution. This base corrodes any type of stain-
less steel and promotes the development of
rust.
Also steel and steel chips extract oxygen from
the passive layer of the stainless steel, which
can cause rust.
REMOVING THE ASHES
After each use, thoroughly remove all ash resi-
dues after they have cooled down completely.
The ashes can be removed as follows: Loosen
the Allen screws of the upper part, they do not
need to be removed completely. Carefully take
out the ash dish with the ashes. Then put the
emptied and cleaned ash dish and the upper
part back together as described in the "Assem-
bly" section of this user manual. Please dispose
of the ashes properly. Never throw hot ashes in
the household refuse!
CARE
Clean the entire Pyron with clear water, a mild
detergent and a soft cloth or sponge. A clea-
ning agent for stainless steel and stainless
steel wool can be used to remove heavy soil.
Always perform cleaning in the direction of
the brush structure, as circular motions can
damage the surface.
Never use a wire brush, a wire sponge or
aggressive (abrasive or corrosive) detergents
for cleaning, as this damages the passive layer
of the stainless steel and leads to rust.
You can treat the Pyron with a chrome finish to
revive the shine and prevent rust. Discoloura-
tions of the stainless steel due to heat cannot
be avoided.
STORAGE
Do not leave the fire barrel stand unprotected
outdoors. Store the fire barrel only when it has
completely cooled down and when it is clean
of ashes and traces of combustion, and only
when it is dry. Under all circumstances please
avoid waterlogging or condensation humidity.
Never store the Pyron close to steel objects
(e.g. rims, tools) or use it as storage area for
similar objects, as this causes contact corrosion
due to chemical reactions.
If possible cover the Pyron to protect it from
humidity and flash rust.

WARRANTY

Under normal use, a warranty period of two
years will apply to the Fire Barrel Pyron from
the date of purchase. Please note that the
colour changes of the stainless steel are not
a defect. If you cannot properly use the fire
barrel due to a defect in material or manu-
facturing, you are entitled to a warranty repair.
Please contact your dealer for that purpose.
SERVICE
If you have questions or if you need addi-
tional information, please let us know. You
can contact our support team via email at:
service@feuerhand.com