Fitting The Gas Inlet Casing (≤ A275-L); Fig. 52: Fitting The Gas Outlet Casing (A275-L And Smaller); Table 35: Tightening Torque (51087) - ABB XAC25580 Operation Manual

Operation Manual / A200-L
9 Disassembly and assembly / 9.14 Fitting the gas inlet casing (≤ A275-
L)
9.14 Fitting the gas inlet casing (≤ A275-L)
Fig. 52: Fitting the gas outlet casing (A275-L and smaller)
Product
A255-L
A260-L
A265-L
A270-L
A275-L
Table 35: Tightening torque (51087)
1) Pre-tightening torque of the nuts
1. Coat threaded stud (51086) with high-temperature grease, screw in up to the stop in the
gas outlet casing (61001) and tighten hand-tight.
2. Loop around the gas inlet casing (51001) with the lifting gear and secure it to the crane.
3. Push gas inlet casing over the threaded studs up to the gas outlet casing.
© Copyright 2021 ABB. All rights reserved.
Size
M16
M16
M16
M18
M22
HZTL4036_EN
Tightening torque [Nm]
1)
30 / 140
1)
30 / 140
1)
30 / 140
1)
40 / 200
1)
50 / 380
Rev.T December 2021