Advertisement
Connect the Router
Connect the Router
To set-up and connect your router, follow these steps:
Step 1
Verify that the following items were shipped with your router:
1
2
To connect up to four PC to the router, connect the Ethernet cable from the Ethernet switch ports to the
Step 2
PC.
To configure the router through the Cisco IOS command-line interface (CLI), connect the router console
Step 3
port to a terminal or PC.
To connect to an ISP, attach one end of the cable adapter to the Cisco cable modem HWIC (high-speed
Step 4
WAN interface card) and the other to the cable source.
Step 5
Connect the power cord as shown. Move the power switch to the ON position.
The following indications appear:
•
•
Cisco 1805 DOCSIS 2.0 Cable Router Quick Start Guide
2
Ethernet cables
Console cable
SLOT 1
HWIC
4ESW
PWR 3x LNK PWR 2x LNK PWR 1x LNK PWR 0x LNK
CF
AIM
DO NOT REMOVE DURING NETWORK OPERATION
1
2
To cable source
The green SYS PWR LED on the front of the chassis lights up.
The fan operates.
3
4
SLOT 0
FE 0/1
CONSOLE
FDX
100
LINK
HWIC-
CABLE-D-2
CABLE
FDX
100
LINK
FE 0/0
AUX
3
F connector
(Cable TV In)
Cable adapter
AC power cord
CISCO 1805
DS
LINK
US
POWER
ONLINE
4
78-18313-01
Advertisement
