Table of Contents
Advertisement
NVR User Manual
2.4.1 Pair IP Camera
Right-click in live view mode and select Pair IP Camera to enter the Pair IP Camera interface,
On this page you can see device status such as channel, Status, MAC Address, Remove and Add IP
Camera.
Note
The NVR and IP Camera are already paired. If you need to match more cameras (Only FI9910W),
please refer to the following steps.
Click Pair button and press the Reset button of the camera tail cable at the same time, until it
prompts that the pairing is successful. When finished code matching, The live view interface will
show you the video feed of each IP Camera.
www.foscam.com
9
Advertisement
Table of Contents
