Fig. 82: Installing The Uncoupled Filter Silencer; Table 55: Tightening Torque (72054) - ABB HT604449 Operation Manual

Operation Manual / A150-M56/66/57/67 - A155-M..
10 Dismantling and fitting with removed air inlet and gas outlet /
10.20 Installing air inlets
A155-M Uncoupled filter silencer
Fig. 82: Installing the uncoupled filter silencer
Product Size Tightening torque [Nm]
A155 M16 275
Table 55: Tightening torque (72054)
1. Secure lifting gear to filter silencer (81000).
2. Install the filter silencer (81000).
3. Fit the hexagon nuts (72054) together with Verbus Ripp® washers (72053) and three new
safety plates (72055) (uniformly at 120° to one another). Observe the tightening torque.
© Copyright 2021 ABB. All rights reserved. HZTL4032_EN Rev.Q January 2021