Malfunctions - Bosch WAN28004GB User Manual And Assembly Instructions

Fault
lights up.
flashes.
All other error codes.

Malfunctions

Fault
The appliance is not work-
ing.
The programme does not
start.
Cause
The tap is turned off.
The water inlet hose is
kinked or jammed.
The temperature is too high.
Water level is too high.
Laundry is caught in the
door.
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed Start /
Reload.
Door is not closed.
Childproof lock is activated.
Finish in is activated.
Troubleshooting en
troubleshooting
Turn on the tap.
▶
Ensure that the water inlet hose is
▶
not kinked or jammed.
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 34
Start the Drain programme.
▶
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start / Reload to start the
4.
programme.
Close the door.
1.
Press Start / Reload to start the
2.
programme.
Call the after-sales service.
▶
→ "Customer Service", Page 53
troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
Press Start / Reload.
▶
Close the door.
1.
Press Start / Reload to start the
2.
programme.
→ "Deactivating the childproof
▶
lock", Page 35
Check whether Finish in is activ-
▶
ated.
→ "Buttons", Page 23
45