Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WAN280F2CH
Summary of Contents for Bosch WAN280F2CH
- Page 1 Washing machine WAN280F2CH [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 7 Display ........ 20 1.1 General information.... 4 8 Buttons ........ 22 1.2 Intended use....... 4 1.3 Restriction on user group... 4 9 Programmes ....... 23 1.4 Safe installation ...... 5 10 Accessories...... - Page 3 14 Childproof lock...... 30 14.1 Activating the childproof lock ......... 30 14.2 Deactivating the childproof lock ......... 30 15 Basic settings...... 31 15.1 Overview of the basic set- tings........ 31 15.2 Changing the basic set- tings........ 32 16 Cleaning and servicing .... 32 16.1 Cleaning the drum.... 32 16.2 Cleaning the detergent drawer........ 32...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be re- placed by the manufacturer, the manufacturer's Customer Ser- vice or a similarly qualified person in order to prevent any risk. -
Page 10: Preventing Material Damage
en Preventing material damage Make sure that the length of the ▶ 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be ATTENTION! able to operate properly. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the tumble mediately if they come into contact dryer afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy... -
Page 12: Installation And Connection
en Installation and connection Replace the accessories in ques- ▶ 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 26 Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order. As a result, water stains may ATTENTION! remain in the appliance. - Page 13 Installation and connection en If the appliance is tilted at an angle 4.4 Removing the transit greater than 40°, residual water may bolts leak out of the appliance and cause material damage. The appliance is secured for trans- Tilt the appliance carefully. portation using transit bolts on the ▶...
-
Page 14: Connecting The Appliance
en Installation and connection Remove the power cable from the Push the 4 cover caps downwards. holder. Note: To install the transport locks to Remove the 4 sleeves. transport the appliance, perform these steps again in the reverse or- der. 4.5 Connecting the appliance Connecting the water inlet hose WARNING Risk of electric shock! -
Page 15: Aligning The Appliance
Installation and connection en Water outlet connection types 4.6 Aligning the appliance This information is intended to help In order to reduce noise and vibra- you to connect this appliance to the tion and to prevent the appliance water outlet. from moving, align the appliance cor- rectly. -
Page 16: Connecting The Appliance To The Electricity Supply
en Installation and connection Screw the lock nuts tightly against the housing using a WAF 17 wrench. In doing so, hold the foot tight and do not adjust its height. 4.7 Connecting the appliance to the electricity supply Note: Your electrical domestic install- ation for this appliance must comply with the local legal provisions and safety regulations, and should in-... -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Maintenance flap for the drain Water inlet hose → Page 14 pump → Page 33 Door... -
Page 18: Control Panel
en Familiarising yourself with your appliance Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 23 Programme selector → Page 27... -
Page 19: Before Using For The First Time
first time en Pour washing powder into com- first time 6 Before using for the partment II. first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry. -
Page 20: Display
en Display 7 Display The display shows the current settings, options or relevant information. Display Designation More information 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. "Ready in" time → "Buttons", Page 22 Recommended The maximum load capacity for the selec- load ted programme in kg. - Page 21 Display en Display Designation More information End of pro- Programme status gramme Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 30 SpeedPerfect Short wash activated.
-
Page 22: Buttons
en Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection More information ¡ Start Start, cancel or pause the pro- gramme. ¡ Cancel ¡ Pause ¡ Activate Activate or deactivate a shorter pro- gramme duration. ¡... -
Page 23: Programmes
Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Baumwolle / Wash hard-wearing items made from cotton, linen Coton or blended fabrics. (Cotton) Also suitable as a short programme for normally soiled laundry when you activate Programme setting: ¡... - Page 24 en Programmes Programme Description Max. load (kg) Pflegeleicht / Wash items made from synthetic or blended fab- Synthétiques rics. (Easy Care) Programme setting: ¡ Max. 40 °C ¡ Max. 1200 rpm Schnell/Mix / Wash items made from cotton, linen, or synthetic or Rapide/Mix blended fabrics.
- Page 25 Programmes en Programme Description Max. load (kg) Note: Once the set temperature has been reached, it remains constant throughout the entire washing process. Programme setting: ¡ Max. 60 °C ¡ Max. 1400 rpm Extra Kurz Wash items made from cotton, or synthetic or blen- 15'/30' / Ex- ded fabrics.
-
Page 26: Accessories
en Accessories 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 47. Order number Water inlet hose exten- Extend the water inlet WMZ2381 sion hose for cold water or AquaStop (approx. -
Page 27: Detergents And Care
Detergents and care products en ¡ Wash large and small items of Turn the programme selector to a ▶ laundry together programme. ¡ Wash laundry with fresh stains im- mediately 13.2 Setting a programme ¡ Pretreat laundry with dried stains and wash several times Turn the programme selector and ¡... -
Page 28: Inserting The Measuring Aid For Liquid Detergent
en operation Pull out the detergent drawer. 13.5 Inserting the measuring Pour in detergent. aid for liquid detergent → "Detergent drawer", Page 17 If you order the measuring aid as an If required, add the care product. accessory, you must use the measur- Push in the detergent drawer. ing aid. -
Page 29: Soaking Laundry
operation en Remove the laundry. 13.9 Soaking laundry → "Unloading the laundry", Note: No additional detergent is re- Page 29 quired. The washing solution is then used for washing. 13.12 Resuming the pro- Start the programme. gramme when the pro- To pause the programme, after ap- gramme status is Rinse prox. -
Page 30: Childproof Lock
en Childproof lock Leave the appliance door and de- tergent drawer open so that resid- ual water can evaporate. 14 Childproof lock Secure your appliance against being operated unintentionally using the controls. 14.1 Activating the childproof lock Press and hold the two 3 Sec. ▶... -
Page 31: Basic Settings
Basic settings en 15 Basic settings You can configure the basic settings for your appliance to meet your needs. 15.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 32: Changing The Basic Set- Tings
en Cleaning and servicing 15.2 Changing the basic set- 16 Cleaning and servi- tings cing Set the programme selector to po- To keep your appliance working effi- sition 1. ciently for a long time, it is important to clean and maintain it carefully. 16.1 Cleaning the drum CAUTION Risk of injury! -
Page 33: Cleaning The Drain Pump
Cleaning and servicing en Pull out the insert upwards. Clean the opening for the deter- gent drawer. Clean the detergent drawer and in- sert with water and a brush, and Push in the detergent drawer. then dry them. 16.3 Cleaning the drain pump Clean the drain pump in the event of faults, e.g. - Page 34 en Cleaning and servicing Slide a sufficiently large container CAUTION - Risk of scalding! under the opening. When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
- Page 35 Cleaning and servicing en Insert the pump cap. Cleaning the drain pump Ensure that the parts of the Requirement: The drain pump is ‒ pump cap are correctly as- empty. → Page 33 sembled. Since water may remain in the drain pump, unscrew the pump cap carefully.
- Page 36 en Cleaning and servicing Insert the mains plug. Before the next wash Switch on the appliance. To prevent unused detergent from Pour 1 litre of water into compart- flowing straight into the outlet in the ment II. next wash, run a suitable programme for draining after you have emptied Select a suitable programme for the drain pump.
-
Page 37: Troubleshooting
Troubleshooting en 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 38 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 14 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 39 Troubleshooting en Fault Cause and troubleshooting "E:35 / -10" The appliance is leaking. Turn off the water tap. ▶ Call the after-sales service. ▶ → "Customer Service", Page 47 lights up. The temperature is too high. Wait until the temperature has dropped. ▶ → "Cancelling the programme", Page 29 ▶...
- Page 40 en Troubleshooting Fault Cause and troubleshooting The programme does Deactivate childproof lock. ▶ not start. → "Deactivating the childproof lock", Page 30 is activated. Check whether is activated. ▶ → "Buttons", Page 22 Laundry is caught in the door. Open the door again. Remove any trapped laundry. Close the door.
- Page 41 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Install the water outlet hose at a maximum height of ▶ ing. 1 metre. Pump cover is not correctly assembled. Correctly assemble the pump cover. ▶ Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶...
- Page 42 en Troubleshooting Fault Cause and troubleshooting The programme dura- The unbalanced load detection system eliminates an tion changes during imbalance by repeatedly redistributing the laundry. the wash cycle. Not a fault – no action required. ▶ Note: When loading, where possible, place large and small items of laundry together in the drum.
- Page 43 Troubleshooting en Fault Cause and troubleshooting High spin speed not Unbalance load detection system is using a reduced reached. spin speed to eliminate an unbalance. Redistribute the laundry in the drum. ▶ Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
- Page 44 en Troubleshooting Fault Cause and troubleshooting Creasing. The load is too large. The next time you run a wash cycle, reduce the ▶ amount of laundry being loaded. Unsuitable programme for the type of fabric. Select the programmes that are suitable for the ▶...
- Page 45 Troubleshooting en Fault Cause and troubleshooting Detergent residue on Detergents may contain water-insoluble substances the dry laundry. that deposit on the laundry. Brush out the laundry after washing and drying. ▶ Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose.
-
Page 46: Emergency Release
en Transportation, storage and disposal 17.1 Emergency release 18.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 33 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 47: Disposing Of Old Appliance
Customer Service en 18.4 Disposing of old appli- 19 Customer Service ance Function-relevant genuine spare parts Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 48: Aqua-Stop Guarantee
en Customer Service 19.2 AQUA-STOP guarantee In addition to warranty claims against the seller under the purchase agree- ment and in addition to our manufac- turer's warranty, we offer compensa- tion under the following conditions. ¡ If our Aqua-Stop system is defect- ive and causes water damage, we will make good the damage for private users. -
Page 49: Consumption Values
Consumption values en 20 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. Programme Load Pro-... -
Page 50: Technical Data
en Technical data Water pressure ¡ Minimum: 21 Technical data 100 kPa (1 bar) ¡ Maximum: Appliance height 84.8 cm 1000 kPa Appliance width 59.8 cm (10 bar) Appliance depth 55.0 cm Length of the wa- 150 cm Appliance depth 60.0 cm ter inlet hose with door closed Length of the wa- 150 cm Appliance depth 101.7 cm... - Page 52 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.