Zone Ii Remote Control Functions - Harman Kardon AVR 7300 Owner's Manual

POWER
MUTE
A
OFF
AVR VID 1 VID 2
B
AM/ / FM VID 3 VID 4
C
DVD CD
TAPE
D
DN TUNING UP
E
F
DN PRESET UP
G
H
DISC SKIP
DISC SKIP
I
VOLUME
To make it easier to follow the instructions that refer
to this illustration, a larger copy may be downloaded
from the Product Support section for this product at
www.harmankardon.com.
å Power Off Button
∫ AVR Selector Button
ç AM/FM Tuner Selector
∂ Input Selectors
≠ Tuning Up/Down – Fast Play Buttons
ƒ Record/Pause Button
© Preset Up/Down – Track Skip Buttons
˙ Disc Skip Button
I
Volume Up/Down Buttons
∆ Play Forward/Reverse/Stop Buttons
˚ Mute Button

ZONE II REMOTE CONTROL FUNCTIONS

The Zone II remote may be used either in the same
room where the AVR 7300 is located or in a separate
room with an optional infrared sensor that is connected
to the AVR 7300's Multiroom IR Input B jack.
K
When it is used in the same room as the AVR 7300,
it will control the functions of the AVR 7300 or any
compatible Harman Kardon products in that room.
When it is used in a separate room via a sensor con-
nected to the Multiroom IR Input B jack, the but-
tons for Power, Input Source, Volume and Mute will
control the source and volume for the second zone,
as connected to the Multiroom Audio and Video
Outputs øO jacks. (See page 44 for complete
information on using the Multiroom system.)
J
å Power Off Button: When used in the room
where the AVR 7300 is located, press this button
to place the unit in Standby. When it is used in a
remote room with a sensor that is connected to the
Multiroom IR Input B jack, this button turns the
Multiroom system on and off.
∫ AVR Selector Button: Press this button to turn
on the AVR 7300. The input in use when the unit was
last on will be selected.
ç AM/FM Tuner Selector: Press this button
to select the Tuner as the input to the Multiroom
system. Press it again to change between the AM
and FM bands.
∂ Input Selectors: When the AVR 7300 is off,
press one of these buttons to select a specific input
and turn the unit on. When the unit is already in use,
pressing one of these buttons will change the input.
NOTE: The Zone II remote may not be used to select
the Front-Panel Video 5 Input
may assign a source connected to these jacks to the
Multiroom System using the Multiroom Button `
on the remote or the MULTI-ROOM SETUP
menu. See page 44 for more information.
≠ Tuning Up/Down – Fast Play Buttons: When
the Zone II remote is used in the same room as the
AVR 7300, these buttons may be used to change the
frequency of the tuner. These buttons may also control
the Fast Play or Fast Reverse functions of compatible
Harman Kardon CD, DVD or cassette decks in the
same room, or from a remote room when an IR link
is connected to the AVR 7300.
ƒ Record/Pause Button: Press this button to
activate the Record or Pause function on compatible
Harman Kardon CD, DVD or cassette deck products.
© Preset Up/Down – Track Skip Buttons: When
the AVR 7300's tuner is selected as the input source,
these buttons will move up or down through the list of
stations that have been stored in the preset memory.
When a CD or DVD changer or player is selected,
these buttons activate the Forward or Reverse Track
or Chapter Skip functions.
˙ Disc Skip Buttons: Press these buttons to
change discs on a compatible Harman Kardon CD or
DVD changer or player.
I Volume Up/Down Buttons: When the Zone II
remote is used in the room where the AVR 7300 is
located, press this button to raise or lower the volume
in that room. When it is used in a remote room with a
sensor that is connected to the Multiroom IR Input
B jack, this button will raise or lower the volume in
the remote room.
∆ Play Forward/Reverse/Stop Buttons: Press
these buttons to control compatible Harman Kardon
CD, DVD or cassette players.
˚ Mute Button: When the Zone II remote is used
in the room where the AVR 7300 is located, press this
button to temporarily silence the unit. When it is used
in a remote room with a sensor that is connected
14 . However, you
to the Multiroom IR Input B jack, this button will
temporarily silence the feed to the remote room
only. Press the button again to return to the previous
volume level.
ZONE II REMOTE CONTROL FUNCTIONS 17