Harman Kardon AVR 7300 Owner's Manual page 15

s Transport Fast-Play/Scan Buttons: These but-
tons have no direct function on the AVR 7300, but
they are used when the remote is programmed for a
compatible DVD, CD or tape player. Pressing these but-
tons will transmit a fast-play forward, fast-play reverse,
or fast-forward or fast-reverse scan command, accord-
ing to the capabilities of the player being controlled. In
the factory default setting, these buttons are prepro-
grammed with the remote codes for Harman Kardon
DVD players so that you may control a compatible
player even when the remote is directly controlling the
AVR, a TV set, or a cable or satellite set-top box.
Main Transport Controls: These buttons have
no direct function on the AVR 7300 but are used
when the remote is programmed for a compatible
DVD, CD or tape player. Pressing these buttons
will transmit a stop ( ), record ( ), or pause (
Í Î
command, according to the capabilities of the player
being controlled. In the factory default setting, these
buttons are programmed with the remote codes for
Harman Kardon DVD players so that you may control
a compatible player even when the remote is directly
controlling the AVR, a TV set, or a cable or satellite
set-top box.
Track Skip Up/Down Buttons: These buttons
do not have a direct function with the AVR 7300, but
when used with a compatibly programmed CD or DVD
changer will change the track or chapter currently being
played. In the factory default setting, these buttons are
programmed with the remote codes for Harman Kardon
DVD players so that you may control a compatible player
even when the remote is directly controlling the AVR,
a TV set, or a cable or satellite set-top box.
Preset Up/Down Button: When the tuner is in
use, press this button to scroll through the stations
programmed into the AVR 7300's memory.
w Tuning Up/Down Button: Press this button
when the tuner is in use to change the station to one
with a higher or lower frequency. When the tuner is in
the MANUAL/MONO mode, each tap of the
selector will increase or decrease the frequency by
one increment. When the tuner receives a strong-
enough signal for adequate reception, MANUAL
TUNED will appear in the Lower Display Line
$ and in the on-screen display. When the tuner is in
the AUTO/STEREO mode, press the button
MAIN REMOTE CONTROL FUNCTIONS MAIN REMOTE CONTROL FUNCTIONS
once, and the tuner will scan for a station with accept-
able signal strength. When the next higher- or lower-
frequency station with a strong-enough signal is tuned,
the frequency scan will stop and the Lower Display
Line $ and the on-screen display will indicate
AUTO TUNED. When an FM Stereo station is
tuned, the display will read AUTO ST TUNED.
See page 35 for more information on using the tuner.
Disc Skip Button: This button has no direct
function for the AVR 7300 but may be used to
change the disc in a CD or DVD changer when the
remote is programmed for that type of device.
Program Button: This button is used to begin
the process of programming the remote. Press and hold
this button for three seconds to place the remote in the
programming mode. Once the red LED under the Set
)
±
Button q lights, release the button. You may then
select from the desired option. (See pages 46 – 55 for
more information on configuring the remote.)
Light Button: Press this button to activate the
remote's backlight for ease of use in darkened rooms.
Multiroom Button: Press this button to begin
the process of activating the multiroom system or to
change the input or volume level for the second zone.
(See page 44 for more information on the multiroom
system.)
Macro Buttons: Press these buttons to store or
recall a "Macro" , which is a preprogrammed sequence
of commands stored in the remote. (See page 49 for
more information on macros.)
Sleep Button: Press this button to place the unit
in the Sleep mode. After the time shown in the display,
the AVR 7300 will automatically go into the Standby
mode. Each press of the button changes the time until
turn-off in the following order:
When the Sleep timer is in use, the front-panel dis-
plays and other indicators will dim to half-brightness.
Night Mode Button: Press this button to
activate the Night mode. This mode is available in
specially encoded Dolby Digital sources, and it
preserves dialogue (center channel) intelligibility at low
volume levels.
OSD Button: Press this button to activate or turn
off the On-Screen Display (OSD) system used to set up
or adjust the AVR 7300's parameters.
Tone Control Button: This button controls the
tone mode settings, enabling adjustment of the bass
and treble boost/cut. You may also use it to take the
tone controls out of the signal path completely for
"flat" response. The first press of the button displays a
TONE IN message in the Lower Display Line
$ and in the on-screen display. To take the controls
out of the signal path, press either of the
Navigation Buttons o until the display reads
TONE OUT. To change the bass or treble settings,
press the button again until the desired option appears
in the Lower Display Line $ and on-screen display
and then press either of the
Buttons o to enter the desired boost or cut
setting. See page 35 for more information on the
tone controls.
Mute Button: Press this button to momentarily
silence the AVR 7300 or TV set being controlled,
depending on which device has been selected.
AM/FM Button: Press this button to select the
AVR 7300's tuner as the listening choice. Pressing this
button when the tuner is already in use will select
between the AM and FM bands.
Channel Up/Down Selector: These selectors
share the disc in the lower portion of the remote with
the Volume Up/Down Buttons
function when the AVR is being controlled, but when
programmed for use with a VCR, TV, cable box, satel-
lite receiver or other similar product, they will change
the channel up or down. See pages 46 – 55 for
more information on programming the remote.
Transport Play Buttons: These buttons have no
direct function on the AVR 7300, but they are used
when the remote is programmed for a compatible
DVD, CD or tape player. Pressing these buttons will
transmit a forward- or reverse-play command,
according to the capabilities of the player being
controlled. In the factory default setting, these buttons
are programmed for Harman Kardon DVD players so
that you may control a compatible player even when
the remote is directly controlling the AVR, a TV set
or a cable or satellite set-top box.
MAIN REMOTE CONTROL FUNCTIONS MAIN REMOTE CONTROL FUNCTIONS
/
⁄ ¤
/ Navigation
⁄ ¤
. They have no
15 15