Harman Kardon AVR 7000 Owner's Manual page 17

Installation and Connections
Figure 1:
SCART/Cinch-Adapter for
playback;
signal flow:
SCART Cinch
Figure 2:
SCART/Cinch-Adapter for
record and playback;
signal flow:
SCART Cinch
Figure 3:
Cinch/SCART-Adapter for
playback;
signal flow:
Cinch SCART
Figure 4:
SCART/S-Video Adapter
for playback;
signal flow:
SCART Cinch
Figure 5:
SCART/S-Video Adapter
for record and playback;
signal flow:
SCART Cinch
Figure 6:
SCART/S-Video Adapter
for playback;
S-Video Out
S-Video Out
signal flow:
Cinch SCART
1
Also other colours possible, e.g. brown and grey.
Important Note for Adapter Cables:
If the cinch connectors of the adapter you'll use
are labeled, connect the Audio and Video "In"
plugs with the corresponding Audio and Video
"In" jacks on the AVR 7000 (and with a VCR
connect the "Out" plugs to the "Out" jacks on
the AVR). Note that with some adapter types it
may be just turned around: If no signal is audi-
ble/ visible when the VCR is playing connect the
"Out" plugs to the "In" jacks on the AVR and
turned around. If the adapter plugs are not
labeled in that way, pay attention to the signal
flow directions as shown in the diagrams above
and in the instruction attached to the adapter. If
uncertain, don't hesitate to consult your dealer.
Black
Black
Yellow
Yellow
Red
Red
Rot
Red
Schwarz
Black
Important Notes for S-Video connections:
1. Only the S-Video In/Out of S-Video devices
must be connected to the AVR, NOT both, normal
video and S-Video In/Outputs (except the TV, see
item 2).
2. Like all common AV units the AVR 7000 does
not convert the Video signal to S-Video. Thus
both connections must be made from the AVR
7000 to the TV if both, Video and
S-Video sources, are used, and the appropriate
input on the TV must be selected.
Note for RGB signal with SCART:
Black
Black
If you use a unit providing RGB signals on a
Yellow
Yellow
SCART output (as e.g. most DVD players do) and
Red
you want to use that RGB signal, this SCART out-
Red
put must be connected directly to your TV.
Although the AVR 7000 RDS can switch three-
way video signals (like component signals
Black
Black
Y/Pb/Pr), TVs need separate sync signals besides
Red
Red
RGB (also with SCART) that cannot be switched
Blue Blue
1
and provided by the AVR 7000 additionally.
Yellow
Yellow
Green
Green 1
White
White
Rot
Red
Schwarz
Black
S-Video In
S-Video In
Black
Schwarz
Red Rot
Blue 1
Blau
Yellow Gelb
S-Video In
S-Video In
S-Video Out
S-Video Out
INSTALLATION AND CONNECTIONS 17