Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Flight Light L810
Summary of Contents for Flight Light L810
- Page 1 MWI-05-039 – Rev. B Installation and Maintenance Manual Steady Burning Red Obstruction Light FAA Type L810LED Night Vision Compatible Tel: 800.806.3548 (USA) or 1.916.394.2800 • www.flightlight.com • sales@flightlight.com • 2708 47 Avenue, Sacramento, CA 95822-3806 •...
- Page 2 MWI-05-039 – Rev. B...
-
Page 3: Table Of Contents
MWI-05-039 – Rev. B Table of Contents Introduction ............................1 1.1 About the manual ..........................1 Safety Measures ............................ 2 Installation ............................3 3.1Wiring Diagram ............................ 3 3.2 Single Head Obstruction Lights ......................4 3.2.1 Single Head Obstruction Light with Photocell ................4 3.2.2 Mounting Options: ........................ -
Page 4: Introduction
MWI-05-039 – Rev. B 1. Introduction The Flight Light model L810 NVG compatible obstruction light provides an LED-based solution to the FAA style of steady burning red obstruction light. The product complies completely with FAA Advisory Circular AC 150/5345-43J and FAA EB-67D and is certified to these latest standards. -
Page 5: Safety Measures
MWI-05-039 – Rev. B 2. Safety Measures You must know whether your lighting system is powered by AC or DC before installing the fixture. AC models work on a range of 100 to 277VAC and DC models operate from 12 to 48VDC. -
Page 6: Installation
1L_with_chg_1.pdf FAA AC 70/7460-1L The installation of a new complete L810 LED light is similar to that of an incandescent light source assembly. 1. Verify that all supply power is off 2. Use the below wiring diagram and ensure your incoming power is matching the voltage the light was built for. -
Page 7: Single Head Obstruction Lights
MWI-05-039 – Rev. B 3.2 Single Head Obstruction Lights Height: 9” Width: 5.75” Weight: 3.30 Lbs 3.2.1 Single Head Obstruction Light with Photocell Height: 9” Width: 10.5” Weight: 4.10 Lbs... -
Page 8: Mounting Options
MWI-05-039 – Rev. B 3.2.2 Mounting Options: A. Low Surface Mount 1. Mount box to surface 2. Install fittings or conduit using sealing compound on threads. 3. Pull supply wires into box. 4. Thread the light into the cover and run the wires through the top hole and through the gasket. See picture below. -
Page 9: Dual Head Obstruction Light
MWI-05-039 – Rev. B 3.3 Dual Head Obstruction Light Height: 9” Width: 11” Weight: 6.55 Lbs 3.3.1 Dual Head Obstruction Light with Photocell 3.3.2 Dual Head Obstruction Light with Flasher and Photocell Height: 15 ½” Width: 11” Weight: 10.20 Lbs... -
Page 10: Dual Head Obstruction Light With Transfer Relay
MWI-05-039 – Rev. B 3.3.3 Dual Head Obstruction Light with Transfer Relay Height: 14” Width: 11” Weight: 10.50 Lbs 3.3.4 Dual Head Obstruction Light with Transfer Relay and Photocell Height: 14” Width: 11” Weight: 11.25 Lbs... -
Page 11: Mounting Options
For a quick installation on top of a flat surface, we offer the 6” Diameter Floor Flange with 2” thread. The connection to the floor flange is done through our FAA 2” Frangible Floor flange. The bolts for the floor flange are not provided by Flight Light. -
Page 12: Replacement Parts
MWI-05-039 – Rev. B 4. Replacement Parts No. Part Number Part Description FL-810LEDNV-AC 100-277 VAC LED NV Replacement Light Head FL-810LEDNV-DC 12-48 VDC LED NV Replacement Light Head 22-SK4545 Clamp Ring 22-SK4454 Neoprene Gasket 12-SB3/SB4 Single Casting L-810 12-DB3/DB4 Double Casting L-810... - Page 13 MWI-05-039 – Rev. B...
-
Page 14: Maintenance And Repair
5. Secure the unit by closing the clamp ring The functionality of the Flight Light L810LED Obstruction lights is not affected by their use in conjunction with another LED lights or another manufacture’s LED obstruction lights. -
Page 15: Limited Warranty
MWI-05-039 – Rev. B 6. Limited Warranty Duration of the Warranty: Flight Light Inc. warrants all of the goods which it has manufactured to be free of material defects for the following durations. Lamps: For a period of 90 days from the date of shipment to Buyer. Product liability is limited to lamp replacement and does not include incidental labor.