MWI-05-001 – Rev. B Table of Contents Introduction ............................1 1.1 About the manual ..........................1 Safety Measures ............................ 2 Installation ............................3 3.1Wiring Diagram ............................ 3 3.2 Single Head Obstruction Lights ......................4 3.2.1 Single Head Obstruction Light with Photocell ................4 3.2.2 Mounting Options: ........................
MWI-05-001 – Rev. B 1. Introduction The Flight Light model L810 obstruction light provides an LED-based solution to the FAA style of steady burning red obstruction light. The product complies completely with FAA Advisory Circular AC 150/5345-43H and FAA EB-67D and is certified to these latest standards.
MWI-05-001 – Rev. B 2. Safety Measures You must know whether your lighting system is powered by AC or DC before installing the fixture. AC models work on a range of 100 to 277VAC and DC models operate from 12 to 48VDC.
MWI-05-001 – Rev. B 3. Installation The FAA has published guide specifications for the installation and maintenance of obstruction lighting products. FAA advisory circulars may be obtained by direct internet access or by contacting FAA. Direct Internet Access: https://www.faa.gov/documentLibrary/media/Advisory_Circular/AC_70_7460- 1L_with_chg_1.pdf FAA AC 70/7460-1L The installation of a new complete L810 LED light is similar to that of an incandescent light source assembly.
MWI-05-001 – Rev. B 3.2 Single Head Obstruction Lights Height: 9” Width: 5.75” Weight: 3.30 Lbs 3.2.1 Single Head Obstruction Light with Photocell Height: 9” Width: 10.5” Weight: 4.10 Lbs...
MWI-05-001 – Rev. B 3.2.2 Mounting Options: A. Low Surface Mount 1. Mount box to surface 2. Install fittings or conduit using sealing compound on threads. 3. Pull supply wires into box. 4. Thread the light into the cover and run the wires through the top hole and through the gasket. See picture below.
MWI-05-001 – Rev. B 3.3.3 Dual Head Obstruction Light with Transfer Relay Height: 14” Width: 11” Weight: 10.50 Lbs 3.3.4 Dual Head Obstruction Light with Transfer Relay and Photocell Height: 14” Width: 11” Weight: 11.25 Lbs...
For a quick installation on top of a flat surface, we offer the 6” Diameter Floor Flange with 2” thread. The connection to the floor flange is done through our FAA 2” Frangible Floor flange. The bolts for the floor flange are not provided by Flight Light.
5. Secure the unit by closing the clamp ring The functionality of the Flight Light L810LED Obstruction lights is not affected by their use in conjunction with another LED lights or another manufacture’s LED obstruction lights.
LED Light Fixtures: For a period of 2 years from the date of shipment to Buyer. Complete Systems: Systems including at least one Flight Light Inc. Controller and one Flight Light Inc. LED Light Fixture, for a period of 5 years from the date of shipment to Buyer.